• Alpha-Omega 200 Bass Amplifier-Amplifier-Darkglass
  • Alpha-Omega 200 Bass Amplifier-Amplifier-Darkglass
  • Alpha-Omega 200 Bass Amplifier-Amplifier-Darkglass
1 3

Darkglass

Alpha-Omega 200 Bass Amplifier

Alpha-Omega 200 Bass Amplifier

Find a Dealer

The Alpha·Omega 200 is slimmer and lighter than ever. Packed with Aux-in and headphone output for quiet practicing and an intuitive push potentiometer for the mute and master control. Pre/bypassed with switchable ground lift making these amps reliable for all sorts of musicians with an ample array of possibilities.

  • 200W amplifier featuring the signature Alpha-Omega voicing
  • Slim, lightweight body
  • Studio quality 4-band EQ
  • 3.5mm headphones and XLR DI outputs
  • Aux input for backing tracks
View full details

αΩ²°°

The compactness and lightweight make them flawless and convenient for rehearsals and live gigs, while an EQ section enhances the definition and clarity of sound across the spectrum.

Video thumbnail

Front Panel Features

  • Input

    Use this jack to connect your instrument via a standard ¼” mono cable.

  • Drive

    This knob controls the amount of distortion that the Alpha·Omega Engine will deliver. It will cover a wide range of overdriven tones from subtle break up to overly distorted sounds.

  • Mod

    Selects or mixes between the two distinct distortion circuits: Alpha is punchy, tight with a lot of definition, whereas Omega is simply brutal and raw.

  • Blend

    Use this knob to mix between the Clean signal and the Distortion signal (Alpha·Omega Engine).

  • Bass

    +-12dB at 80Hz. Use this knob to change the low-end content of the signal.

  • Mids

    +-12dB at 1kHz. This knob controls the mid content of the signal.

  • Treble

    +-12dB at 5kHz. Use this knob to change the high content of the signal.

  • Master/Mute

    Use this knob to control the overall volume of the amplifier. Use this push knob button to mute the speaker out.

  • Dimensions

    Width: 15 cm / 6″
    Length: 15.7 cm / 6¼”
    Height: 5.2 cm / 2″
    Weight: 0.965 kg / 2.12 lb

1 13

Back Panel Features

  • Speaker Output

    Use this connector to connect the amplifier to your cabinet. This Speakon combo jack allows for either Speakon or ¼” speaker cable operation.

  • Ground Lift

    Use this control to lift the ground of the DI XLR output. If you are experiencing ground noise in your DI signal try changing the setting of this control.

  • DI Output

    Use this connector to send your bypass signal to the console, mic preamp, interface, etc. The DI OUTPUT delivers only the bypass DI signal.

  • AC Socket

    Use this connector to feed electric power to the amplifier. 100 – 230 VAC, 50-60Hz.

  • AC Power Off

    Use this Switch to release the audio energy from your bass.

  • Headphone Output

    Connect your Headphones and enjoy the analog cabinet emulation.

  • Aux In

    Use this connector to play music from your laptop, phone, MP3 player, etc. This input is routed only to the headphone output without cabinet emulation.

  • Warning

    · There are no user-serviceable parts inside the amplifier. Do not open the amp.

    · Never use the amp in a high moisture environment or near liquids.

    · The Alpha·Omega 200 can deliver more than 100 dB of power. Exposure to this level of sound can damage your hearing. Always use proper hearing protection when exposed.

1 8

SUPPORT + DOCUMENTATION

SUPPORTREGISTER YOUR PRODUCT

DISCLAIMER

In the interest of continuous improvement, specifications are subject to change without notice. If you have any questions, please don’t hesitate to contact us at www.darkglass.com

The manufacturer claims that the above product fulfills the requirements as set by EN55013, EN55020, EN60555-2, EN60555-3, RoHS, WEEE.