• Microtubes 500 Combo 210-Combos-Darkglass
  • Microtubes 500 Combo 210-Combos-Darkglass
  • Microtubes 500 Combo 210-Combos-Darkglass
  • Microtubes 500 Combo 210-Combos-Darkglass
  • Microtubes 500 Combo 210-Combos-Darkglass
1 5

Darkglass

Microtubes 500 Combo 210

Microtubes 500 Combo 210

Find a Dealer

Unleash 500 Watts of pure analog power and experience unparalleled flexibility with the Darkglass Microtubes 500 2x10 combo amp.

  • 500W 2x10 analog combo amplifier
  • Analog preamp with signature VMT and B3K drives
  • Studio compressor with automatic gain adjustment
  • Four-band ultra quiet EQ with adjustable mid frequencies
  • Pre/post XLR DI, line out, and headphone outputs
View full details

Redefining Bass with Precision

Designed for ultimate sonic quality and portability, the M Combo Series defines excellence in Analog bass tones and precision. Featuring custom-made Eminence® speakers and powered by an efficient 500 W class D power module, the M Combo Series are perfect for the musician demanding premium analog character across venues, rehearsals, and home setups.

  • Darkglass-Microtubes-500-Combo-112-Card-1

    THREE

    Controls the amount of distortion that the Microtubes Engine will deliver. Press to select the drive mode: OFF/Vintage Microtubes /Microtubes B3K.

  • Darkglass-Microtubes-500-Combo-112-Card-2

    PASSIVE/ACTIVE

    Use this push-button switch to change from passive to active mode. If your bass is active it can have a hotter signal making the amp to distort early (feel free to use if such additional distortion is desired).

  • Darkglass-Microtubes-500-Combo-112-Card-3

    HEADPHONE OUTPUT

    Connect your Headphones and enjoy the analog cabinet emulation.

1 3
Video thumbnail

Top Panel Features

  • Input

    Use this jack to connect your instrument via a standard ¼” mono cable.

  • Headphone Output

    Connect your Headphones and enjoy the analog cabinet emulation.

  • Passive/Active

    Use this push-button switch to change from passive to active mode. If your bass is active it can have a hotter signal making the amp to distort early (feel free to use if such additional distortion is desired).

  • Compression

    Controls the amount of dynamic compression. The make up gain is adjusted automatically.

  • Drive

    Controls the amount of distortion that the Microtubes Engine will deliver. Press to select the drive mode: OFF/Vintage Microtubes /Microtubes B3K.

  • Blend

    Use this knob to mix between the Clean signal and the Distortion signal.

  • Level

    Controls Microtubes Engine’s output volume.

  • Low

    ±12 dB @ Low shelf

  • Low Mids

    ±12 dB @ 500 Hz/1 kHz

    Press to select the frequency

  • High Mids

    ±12dB @ 1.5 kHz / 3 kHz

    Press to select the frequency

  • Treble

    ±12dB @ High shelf

  • Master

    Use this knob to control the overall volume of the combo. Press for Mute.

1 18

Back Panel Features

  • AC Power ON/OFF

    Power ON the combo beast.

  • AC Socket

    Use this connector to feed electric power to the amplifier. 100 – 230 VAC, 50-60Hz. Set the voltage selector switch to the correct position before turning on the amplifier!

  • MIDI In

    Standard DIN connector. Use the 7-pin MIDI connector only with the Darkglass MIDI footswitch, and use a 5-pin connector with other MIDI equipment.

  • USB

    The USB-C port unlocks Combo’s USB audio interface capabilities and allows connection to the Darkglass Suite. USB MIDI In/Out is also supported.

  • Post DI Output

    Use this connector to send your signal to the console, mic preamp, interface, etc. This output provides the processed signal with or without the IR.

  • Ground Lift

    Use this control to lift the ground of the XLR outputs. If you are experiencing ground noise in your DI signal, try changing this control.

  • Pre DI Out

    Use this connector to send your signal to the console, mic preamp, interface, etc. This output provides the unprocessed signal.

  • Line Out

    Use this connector to send your signal to line input of a console, interface, etc. This output provides the processed signal without the IR. You can also link several combos together using this output!

  • Line In

    This input accepts +4 dBu line level signals from an amp modeler, keyboard, etc. Use this input when linking Darkglass Combos.

  • Send

    Use this output to send the signal to your outboard gear.

  • External Speaker

1 16

Darkglass Suite

The Infinity Combo comes preloaded with five versatile factory presets. While using the Darkglass Suite with the Infinity Combo isn’t required, we highly recommend it!

The Darkglass Suite unlocks the full potential of the Infinity Combo by providing an interface to interact with and modify the signal chain for each preset.

Use the iOS or Android versions of the Darkglass Suite to create, edit, share, and apply presets.

Darkglass-Microtubes-500-Combo-210-Technical-Details

Technicals details

Woofers
Custom Design Eminence® Speaker

Horn
Eminence® Tweeter

Power Rating RMS
500 Watts

Dimensions
Width: 46.4 cm / 18.2″
Height: 61.1 cm / 24″
Depth: 39.5 cm / 15.5″
Weight: 17.3 kg / 38.13 lb

WARNING: This device can emit extremely loud sounds that might result in temporary or permanent hearing loss. Please proceed with caution when setting and adjusting the volume.

SUPPORT + DOCUMENTATION

SUPPORTREGISTER YOUR PRODUCT

DISCLAIMER

In the interest of continuous improvement, specifications are subject to change without notice. If you have any questions, please don’t hesitate to contact us at www.darkglass.com

The manufacturer claims that the above product fulfills the requirements as set by EN55013, EN55020, EN60555-2, EN60555-3, RoHS, WEEE.