The Duality is a unique fuzz pedal that contains two discrete fuzz circuits—a gated saw-tooth wave and a raunchy high-gain sound—which can be mixed together to yield a vast selection of distinct sonic textures
Sets the volume of the overdriven signal.
Mixes two discrete fuzz circuits. Set it at minimum for a pure gated saw-tooth wave, or crank it up for a tighter high gain fuzz.
Width: 50 mm /2″
Length: 45 mm/ 1¾″
Height: 100 mm / 4″
Weight: 205 g / 0.45 lb
The Duality Fuzz has a current draw of 30 mA. Only use a regulated 9V DC adapter with a center-negative plug.
Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.
Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.
Controls the amount of high frequency content in the fuzz signal.
Input Impedance 1 MΩ
Output Impedance 100 kΩ
Current Consumption ~40 mA
Voltage 9V DC (Center Negative)
In the interest of continuous improvement, specifications are subject to change without notice. If you have any questions, please don’t hesitate to contact us at www.darkglass.com
The manufacturer claims that the above product fulfills the requirements as set by EN55013, EN55020, EN60555-2, EN60555-3, RoHS, WEEE.