• Microtubes X7-Pedals-Darkglass
  • Microtubes X7-Pedals-Darkglass
  • Microtubes X7-Pedals-Darkglass
  • Microtubes X7-Pedals-Darkglass
  • Microtubes X7-Pedals-Darkglass
1 5

Darkglass

Microtubes X7

Microtubes X7

£306.00 GBP
£306.00 GBP
Sale Sold out
Shipping calculated at checkout.
  • High Pass Frequency: Controls the cutoff frequency to be distorted, ranging from 100Hz to 1kHz
  • High Drive: Sets the amount of distortion for the high pass side
  • High Level: Sets the output volume of the distorted high-pass signal
  • Low Pass Frequency: Controls the cutoff frequency to be mixed back to the high-pass side
  • Low Comp: Sets the amount of compression for the low-pass signal
  • Low Level: Sets the output volume of the low-pass signal
  • Master: Sets the overall volume of the unit
View full details

╳

The Microtubes X7 series brings the studio method producers have been using the years to cover the whole bass distortion spectrum: from articulate high gain to punchy mild overdrive, raw and gnarly fuzz and everything in between. You now have absolute control in constructing your vision of what the perfect bass distortion texture, definition, and size should have.

Video thumbnail

Front Features

  • HIGH PASS FREQUENCY

    Controls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition.

  • High Drive

    Sets the amount of distortion for the high pass side.

  • High Level

    Sets the output volume of the distorted high-pass signal.

  • Low Pass Frequency

    Controls the cutoff frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids.

  • Low Comp

    Sets the amount of compression for the low-pass signal.

  • Low Level

    Sets the overall volume of the unit.

  • Master

    Sets the overall volume of the unit.

  • Low Shelf

    +-12dB @ 80 Hz

  • 500 HZ

    +-12dB

  • 1 KHZ

    +-12dB

  • High Shelf

    +-12dB @ 5 kHz

  • Dimensions

    Width: 94 mm / 3¾″
    Length: 120 mm/ 4¾″
    Height: 46 mm / 1¾″
    Weight: 320 g / 0.7 lb

  • Warning

    The Microtubes X7 has a current draw of 100mA. Only use a regulated 9V DC adapter with a center-negative plug.

    Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.

1 13

Input and Outputs

  • OUTPUT

    Connect from the ¼” Output jack to the input of your amplifier or another effects pedal.

  • Ground Lift

    Use this control to lift the ground of the XLR output. If you are experiencing ground noise in your DI signal, try changing this control.

  • Direct Output

    A balanced version of the ¼” output, useful for running into PA’s or studio mixing consoles.

  • Input

    Connect your instrument or output from your pedal board to the ¼” mono jack.

  • 9V DC

    Only use a regulated 9V DC adapter with a center-negative plug.

  • Parallel Output

    A passthrough for your input signal, useful for parallel processing.

1 8

SUPPORT + DOCUMENTATION

SUPPORTREGISTER YOUR PRODUCT

DISCLAIMER

In the interest of continuous improvement, specifications are subject to change without notice. If you have any questions, please don’t hesitate to contact us at www.darkglass.com

The manufacturer claims that the above product fulfills the requirements as set by EN55013, EN55020, EN60555-2, EN60555-3, RoHS, WEEE.